manualshive.com logo in svg
background image

K-46

Temperature Meter 

K3MA-L

Specifications

Ratings 

K3MA-L 100-240VAC, K3MA-L-C 100-240VAC

K3MA-L 24VAC/VDC, K3MA-L-C 24VAC/VDC

Supply voltage

100 to 240 VAC

24 VAC (50/60 Hz), 24 VDC

Operating voltage range

85% to 110% of the rated supply voltage

Power consumption 
(under maximum load)

6 VA max.

4.5 VA max. (24 VAC)
4.5 W max. (24 VDC)

Insulation resistance

20 M

 min. (at 500 VDC) between external terminal and case.

Insulation provided between inputs, outputs, and power supply.

Dielectric strength

2,000 VAC for 1 min between external terminal and case.
Insulation provided between inputs, outputs, and power supply.

Noise immunity

±

1,500 V on power supply terminals in normal or com-

mon mode.

±

µ

s, or 100 ns for square-wave noise with 1 ns.

±

480 V on power supply terminals in normal mode. 

±

1,500 V in common mode.

±

µ

s, or 100 ns for square-wave noise with 1 ns.

Vibration resistance

Vibration: 10 to 55 Hz, Acceleration: 50 m/s

2

 

5 min each in X, Y, and Z directions for 10 sweeps.

Shock resistance

150 m/s

2

 (100 m/s

2

 for relay contact outputs) 3 times each on 3 axes, 6 directions.

Ambient temperature

Operating:

10

°

C to 55

°

C (with no condensation or icing)

Storage:

25

°

C to 65

°

C (with no condensation or icing)

Ambient humidity

Operating:25% to 85% (with no condensation)

Approved safety standards

UL3121-1, conforms to EN61010-1 (Pollution degree 2/overvoltage category II) 
Conforms to VDE0106/P100 (finger protection)

EMC

(EMI)A1Industry
Emission Enclosure:CISPR 11 Group 1 class A: CISRP16-1/-2
Emission AC Mains:CISPR 11 Group 1 class A: CISRP16-1/-2
(EMS)A1Industry
Immunity ESD:EN61000-4-2:4 kV contact discharge
8 kV air discharge
Immunity RF-interference:EN61000-4-3:10 V/m (amplitude-modulated, 80 MHz to 1 GHz)
Electrical Fast Transient Noise:EN61000-4-4:2 kV (power line)
Immunity Burst Noise:1 kV line to line (I/O signal line)
Immunity Surge:EN61000-4-5:1 kV (power line)
2 kV line to ground (power line)
Immunity Conducted Disturbance:EN61000-4-6:3 V (0.15 to 80 MHz)
Immunity Voltage Dip/Interrupting:EN61000-4-11:0.5 cycle, 0, 180

°,

 100% (rated voltage)

Weight

Approx. 200 g

Содержание K3MA-L

















Отзывы: