manualshive.com logo in svg

Omron H7CC Series, Руководство пользователя, Страница: 46 / 64

Поделиться
Скачать
Omron H7CC Series Скачать руководство пользователя страница 46

H7CC-R

@

46

Nomenclature

1

9

2

3

6

7

8

4

5

10

11

ON
(Enable)

(Factory setting) OFF

(Disable)

10 mm

6 mm

7. Up Keys (UP1 to UP6)

11. Status indicator

9. Hold Operation (UP6+DW6)

8. Down Keys (DW1 to DW6)

<When Run mode is not selected.>
· When the indicator display mode is ON

If "Upper and lower limit" or "Area" is selected in 
the tachometer output mode, the ratio of the 
measurement value to the comparison value is 
displayed from 0 to 100%.

· When the indicator display mode is all off or all lit

All off or all lit display.

Note. 

When you press the Up Key or the Down Key, 

the indicator display or all-lit display goes off, 
and the pressed key lights up or blinks.

<When Function Setting Mode is not selected>
· The keys that can be set light up for notification.

(UP1, 2, 3, 4, 5, 6 from right to left)

(DW1, 2, 3, 4, 5, 6 from right to left)

(The hold operation is enabled by pressing and 
holding the keys for 1 second or longer. When the 
keys are pressed simultaneously, all status 
indicators start blinking. The hold operation is 
disabled if the keys are released within 1 second.)
To perform the hold operation, firmly press and hold 
both UP6 and DW6. If you press only UP6 or DW6, 
the set value will change.

10. Mode Operation (UP1+UP3 or DW1+DW3)

(Changes modes and setting items. Press and hold 
the keys for 2 seconds or longer to move to the 
function setting mode. When the keys are pressed 
simultaneously, the status indicators on UP1 (DW1) 
and UP3 (DW3) start blinking. The mode operation is 
disabled if the keys are released within 2 seconds.)

Operation Keys

12. Key-protect Switch

Switches

1. Hold Indicator

 (yellow)

2. Key Protect Indicator

 (yellow)

3. Control Output Indicator

 (yellow)

4. Comparison Value 1, 2 Stage Indicator

(1-output models) 

            (2-output models) 

Lit when the key protect switch is ON. 

(Lit when hold operation is performed. )

5. Present Value (Main Display)

Character height: 10 mm (white)

6. Comparison Value (Sub-display)

Character height: 6 mm (green)

Display Section

Character Size 
for Sub-display

Character Size 
for Main Display

OUT

OUT

1

2

Содержание H7CC Series

































































Отзывы:

Нет отзывов