Omron H7CC Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 64

Omron H7CC Series Скачать руководство пользователя страница 12

H7CC-A

@

12

Dimensions with Front Connecting Socket

*

These dimensions depend on the kind of DIN track and Sockets. (Reference value.)

Accessories (Order Separately)

Protecting the Counter/Tachometer in Environments
Subject to Oil

The panel surface of the H7CC-A/-R is water-resistant (conforming to
IP66). To protect the internal circuits from water penetration through
the space between the H7CC and operating panel, waterproof
packing is included. Attach the Y92F-30 Adapter with sufficient
pressure with the reinforcing screws so that water does not penetrate
the panel.

The Waterproof Packing will deteriorate, harden, and shrink
depending on the application environment. To ensure maintaining the
IP

@

6 waterproof level, periodically replace the Waterproof Packing.

The periodic replacement time will depend on the application
environment. You must confirm the proper replacement time. Use 1
year or less as a guideline. If the Waterproof Packing is not replaced
periodically, the waterproof level will not be maintained. It is not
necessary to mount the Waterproof Packing if waterproof
construction is not required.

P2CF-8(-E)/P2CF-11(-E)

Front Connecting Socket (order separately)

100.9

103.2

*

H7CC-A11

@

/A8

@

The H7CC's panel surface is water-resistive (conforming to IP

@

6)

and so even if drops of water penetrate the gaps between the keys,
there will be no adverse effect on internal circuits. If, however, there
is a possibility of oil being present on the operator's hands, use the
Soft Cover. The Soft Cover ensures protection equivalent to IP54F
against oil. Do not, however, use the H7CC in locations where it
would come in direct contact with oil.

Note: Depending on the operating environment, the condition

of resin products may deteriorate, and may shrink or
become harder. Therefore, it is recommended that resin
products are replaced regularly.

Soft Cover

Y92A-48F1

Hard Cover

Y92A-48

Waterproof Packing

Y92S-29

Note:

The Waterproof Packing is included

with models with screw terminals.

Order the Waterproof Packing separately if it
is lost or damaged. The Waterproof Packing
can be used to achieve IP66 protection.

0.5 to 1 mm

It is recommended that the space
between the screw head and the
Adapter be 0.5 to 1 mm.

Flush Mounting Adapter

Y92F-30

Order the Flush Mounting Adapter with the
following model number separately if it is
lost or damaged.

Note:

The Waterproof Packing is included

with models with screw terminals.

69.6 to 77.6

87

76

4.7

72

72

67

67

Fixture (provided)

Panel (1 to 8 mm)

72

72

48

48

77.3

2.2

4.7

Y92F-45

<H7CC Mounting Example>

Note: 1.

The adapter is black in color.

2.

The Y92F-45 can be used in combination with the Y92F-30

Adapter provided with the Counter.

«
...
10
11
12
13
14
...
»

Содержание H7CC Series

































































Отзывы:

Нет отзывов