Omron GQ-CRM21 Скачать руководство пользователя страница 13

Страница: 13 / 103

Precautions for Safe Use

CompoNet Gateway Unit for CC-Link Operation Manual

Precautions for Safe Use

Observe the following precautions when using a CompoNet Gateway Unit for CC-Link.

Power Supply

• Always use the power supply voltages specified in this manual.

• Take appropriate measures to ensure that the specified power with the rated voltage and frequency is

supplied. Be particularly careful in places where the power supply is unstable.

• Always turn OFF the power supply to the PLC, Gateway Unit, Slave Units, and communications

before attempting any of the following.

• Mounting or dismounting any Units

• Assembling Units

• Setting rotary switches

• Connecting or wiring cables

• Connecting or disconnecting connectors

Installation

• Install and wire Units correctly as described in this manual.

• Before touching a Unit, be sure to first touch a grounded metallic object in order to discharge any

static build-up.

• Make sure that the terminal blocks, connectors, communications cables, and other items with locking

devices are properly locked into place.

• When mounting Units to DIN Track or mounting brackets, mount them securely.

• Make sure that all the Unit mounting screws and cable connector screws are tightened to the torque

specified in this manual.

• Use only the specified communications cables and connectors.

• Use correct wiring parts and wiring tools when wiring the cables in the CC-Link and CompoNet sys-

tems.

Wiring

• Wire Units correctly as described in this manual.

• Double-check all wiring and switch settings before turning ON the power supply.

• Confirm polarity before wiring terminals.

• Observe the following precautions when wiring communications cables.

• Separate the communications cables from power lines and high-tension lines.

• Do not fold communications cables.

• Do not pull on the communications cables or bend them past their natural bending radius.

• Always lay communications cable inside ducts.

• Observe voltage specifications when wiring communications paths and power supplies and when wir-

ing I/O crossovers. Incorrect wiring may result in malfunctions.

• Do not apply voltages or connect loads to the Output Units in excess of the maximum switching

capacity.

• When using Flat Cable I (standard or sheathed) or Flat Cable II (sheathed) for more than one Com-

poNet system, do not bundle the Flat Cables and separate them from each other by at least 5 mm.

• Do not apply power while the cover is open.

• Use only the specified communications cables and connectors.

• Observe the connection distance specifications when connecting communications cables.

• Make sure that metal scraps do not enter a Unit when wiring or processing it.

Содержание GQ-CRM21








































































































Результаты поиска

Содержание GQ-CRM21

Отзывы:

Похожие инструкции для GQ-CRM21

Бренды по названию

Популярные бренды

Omron GQ-CRM21, Руководство по эксплуатации

Результаты поиска

Содержание GQ-CRM21

Отзывы:

Похожие инструкции для GQ-CRM21

Бренды по названию

Популярные бренды