Omron FHV Series, Руководство по установке

Страница: 22 / 164

interface. In the initial operation, take action such as clearing the receiving buffer of the equipment
used.
Failsafe Measures
• When operating a stage or robot using measurement results of the Smart Camera (axis moving dis-
tance output by the calibration or alignment measurement), take measures as follows: Be sure to
operate the stage or robot after confirming the measurement result data on the stage or robot side
that the data are within the movable range of the stage or robot.
Warm-up
• Turn ON the power and wait for 60 minutes or more before conducting precise inspection. The cir-
cuit is not stable directly after the power is turned ON, so brightness may vary gradually.
Camera Installation
• In an environment exposed to high humidity and sharp temperature fluctuation, the inside of the
lighting cover may become cloudy in rare cases. If it becomes cloudy, remove the lighting cover and
wipe off the inside with a soft cloth.
• If installing smart camera main units side by side, secure a space of 30 mm or more wide between
them.
Others
• For better heat radiation, use the separately sold fitting (FHV-XMT-7) or mount the product to the
metal frame (recommended size: 100×110 mm or more and thickness: 10 mm or more).
• Do not assemble the lighting module or waterproof hood in a hot and humid environment. Other-
wise, condensation may occur. If it becomes cloudy, remove the lighting cover and wipe off the
moisture with an absorbent, but soft cloth so as not to damage the product.
• There are two types of polarizing filters: FHV-XPL (for visible light) and FHV-XPL-IR (for both visible
and infrared lights). Use the appropriate option according to the illumination light source.
• If switching the focus for a long period of time continuously except when installing and adjusting the
product, performance may be degraded due to heat generation or abrasion of inner parts.
• When the lens module is mounted to the product, the specificatins of vibration tolerance are
changed.
• Do not touch the lens module after it is mounted. Otherwise, it may be broken.
• If using this product without attaching the lighting module in an environment needing waterproof, use
waterproof hood FHV-XHD series.
• Operate the product by using Calculation and Branch processing items on the Smart Camera side
additionally and creating a check flow, for example, if the stage or robot is within a range of -xxxxx to
xxxxx from its movable range, data are not output to outside.
• The lighting module and lens module are fixed to the smart camera with dropout preventing screws.
Do not remve them from the product.
• When turning on the FHV series, the date/time settings always returns to the default. Therefore, you
need to re-set the date/time with an operation or a communication command every time at startup.
Precautions for Correct Use
20
FHV Series Smart Camera Setup Manual (Z408-E1)