Omron FH-2 Series, Руководство по установке оборудования, Страница: 18 / 244

Warning
WARNING
This product must be used according to this manual and Instruction Sheet. Failure to ob-
serve this may result in the impairment of functions and performance of the product.
This product is not designed or rated for ensuring the safety of persons. Do not use it for
such purposes.
Never connect the AC power supply with this product. When the AC power supply is con-
nected, it causes the electric shock and a fire.
A lithium battery is built into the Controller and may occasionally combust, explode, or burn if
not treated properly. Dispose of the Controller as industrial waste, and never disassemble,
apply pressure that would deform, heat to 100°C or higher, or incinerate the Controller.
If you keep watching the LED light, it may have an adverse effect on the eyes, do not stare
directly into the light emitted from the LED. If a specular object is used, take care not to allow
reflected light to enter your eyes.
Do not touch the terminals while the power supply is ON. Doing so may result in electrical
shock.
Please take external safety measures so that the system as a whole should be on the safe
side even if a failure of a Sensor Controller or an error due to an external factor occurred. An
abnormal operation may result in serious accident.
Please take fail-safe measures on your side in preparation for an abnormal signal due to sig-
nal conductor disconnection and/or momentary power interruption.
An abnormal operation may result in a serious accident.
Anti-virus protection
Install the latest commercial-quality antivirus software on the computer connected to the
control system and maintain to keep the software up-to-date
.
Security measures to prevent unauthorized access
Take the following measures to prevent unauthorized access to our products.
•
Install physical controls so that only authorized personnel can access control systems and
equipment.
•
Reduce connections to control systems and equipment via networks to prevent access
from untrusted devices.
•
Set strong passwords and change them frequently.
•
Scan virus to ensure safety of USB drives or other external storages before connecting
them to control systems and equipment.
Data input and output protection
Validate backups and ranges to cope with unintentional modification of input/output data to
control systems and equipment.
•
Checking the scope of data
•
Checking validity of backups and preparing data for restore in case of falsification and ab-
normalit
ies
•
Safety design, such as emergency shutdown and fail-soft operation in case of data tam-
pering and abnormalities
Safety Precautions
16
FH Series Vision System Hardware Setup Manual (Z366-E1)