7
F3SG-4RA
-25-01TS
Quick Installation Manual
■
Mounting and Beam Alignment
1. Loosen the screws and adjust the angle.
The width across flat of the hexagon socket of the Screws (1) and (2) is S=3.
2. Adjust the mounting position and secure the bracket.
Make sure to position the whole body of the Top/Bottom Bracket (1) within the yellow area of the housing.
3. Secure the bracket to the wall.
Screws to mount the brackets to the wall are not included.
Screw (1)
(Hexagon socket head
cap screw (M4×10))
Top/Bottom
Bracket (3)
Top/Bottom
Bracket (2)
Top/Bottom
Bracket (1)
Top/Bottom
Bracket (3)
Top/Bottom
Bracket (1)
Top/Bottom
Bracket (2)
Screw (2)
(Low head hexagon socket head
cap screw (M5×10))
Top/Bottom
Bracket (1)
Top/Bottom
Bracket (1)
Slide into the housing
Top/Bottom
Bracket (2)
Top/Bottom
Bracket (2)
Slide into the housing
<Backside mounting>
<Side mounting>
(The recommended torque to tighten is 3.0 N•m.)
<Backside mounting>
<Side mounting>
Check
position
Step1
Mount
Step2
Align
beams
Step3
Mounting/Beam Alignment
Wiring
Setting with DIP Switch
Operation check
Содержание F3SG-4RA****-25-01TS Series
