8
Operating Procedure Overview
Parameters are divided into groups called levels. Each of the items that is set in any of the levels is called a parameter.
The parameters on the E5ZN are divided into the following seven levels:
❍
: Indicates items that can be set.
Note:
To move to the Advanced Function Setting Level, set the Initial Setting/Communications Protection parameter in the Protect Level to 0.
Of these levels in normal mode, the Initial Setting Level, Communications Setting Level, and Advanced Function Setting Level can be used only
when operation is stopped. Operation stops when any of these four levels are selected.
It is possible to enter Copy Mode while control is being performed, but copy operations (e.g., upload and download) can be used only when control
has stopped.
Mode/Level
During
operation
Operation
stopped
Normal
mode
Protect Level
❍
---
Operation Level
❍
---
Adjustment Level
❍
---
Initial Setting Level
---
❍
Advanced Function Setting Level
---
❍
Communications Setting Level
---
❍
Copy mode
---
❍
Operation Level
Adjustment Level
Power ON
Initial Setting Level
Communications
Setting Level
Advanced Function Setting Level
Protect Level
Copy
Mode
Control stops.
Password input
set value "
−
169"
During operation
Operation stopped
and
M
Keys 3 s min.
and
M
Keys 1 s min.
Key less
than 1 s
Key
3 s min.
Normal Mode
COPY Key
less than
1 s
COPY Key
1 s min.
Key less
than 1 s
Key
1 s min.
Flashes for Key
1 s or longer.
Key
1 s min.
