E5EX–H
E5EX–H
6
Temperature Sensor Selector (SW206,
INPUT)
This selector determines the temperature sensor to be used. It is set
to position 2 before shipment to designate a K-type (chromel-alumel
thermocouple) temperature sensor. The following table lists the oth-
er possible settings for temperature sensors. Refer to temperature
range charts under Ordering Information for further information.
The scale displayed (
°
C or
°
F) is set on the operating mode selector.
Switch
setting
Temperature
sensor code
Temperature range
°
C
°
F
0
R
0 to 1,700
0 to 3,000
1
S
0 to 1,700
0 to 3,000
2
K
–200 to 1,300
–300 to 2,300
3
J
–100 to 850
–100 to 1,500
4
T
–200 to 400
–300 to 700
5
E
0 to 600
0 to 1,100
6
JPt100*
–99.9 to 450.0
–99.9 to 800.0
7
Pt100*
–99.9 to 450.0
–99.9 to 800.0
8
L
–100 to 850
–100 to 1,500
9
U
–200 to 400
–300 to 700
*JPt100: 100
°
C/139.16
Ω
(JIS (Japan Industrial Standard)).
**Pt100: 100
°
C/138.5
Ω
(DIN, JIS).
Operating Mode Selector (SW201,
FUNCTION)
This DIP switch selects the operational aspects listed in the follow-
ing table.
Function
Pin
number
Pin
setting
Control setting
Operating mode
1
ON
ON/OFF operation
OFF
PID operation*
Control output
2
ON
Normal (cooling)
OFF
Reverse (heating)
Input shift
3
ON
Enabled
OFF
Disabled
Not used.**
4
Leave turned OFF.
Indication
5
ON
°
F
OFF
°
C
PID display
6
ON
Enabled
OFF
Disabled
*PID with 2 degrees of freedom
**Always operate with pin 4 OFF. Operating with pin 4 ON could re-
sult in malfunction.
