![background image](http://html.mh-extra.com/html/omron/e5ck/e5ck_user-manual_742615080.webp)
E5CK
5--21
•
The parameters in this mode can be used only when the “security” parameter (pro-
tect mode) is set to “0” and “1”.
•
This mode contains the parameters for setting the basic specifications of the E5CK
controller. These parameters include parameters for specifying the input type, scal-
ing, output assignments, and direct/reverse operation.
•
To select this mode when in the levels 0 to 2, expansion, option and calibration modes,
press the
key for 1 second minimum. The display changes to the menu display.
If you select [
] using the
key then press the
key for 1 second mini-
mum, the controller enters the setup mode.
•
To select parameters in this mode, press the
key. To change parameter settings,
use the
or
keys.
•
The following table shows the parameters supported in this mode and the page where
the parameter is described.
Symbol
Parameter Name
Page
Input type
5-22
Scaling upper limit
5-23
Scaling lower limit
5-23
Decimal point
5-23
_
C/
_
F selection
5-24
Parameter initialize
5-23
Control output 1 assignment
5-24
Control output 2 assignment
5-24
Auxiliary output 1 assignment
5-25
Alarm 1 type
5-25
Alarm 1 open in alarm
5-26
Alarm 2 type
5-25
Alarm 2 open in alarm
5-26
Alarm 3 type
5-25
Alarm 3 open in alarm
5-26
Direct/Reverse operation
5-26
Setup Mode