![background image](http://html.mh-extra.com/html/omron/e5ck/e5ck_user-manual_742615136.webp)
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No. H078-E1-03D
Revision code
The following table outlines the changes made to the manual during each revision. Page numbers refer
to previous version.
Revision code
Date
Revised content
1
September 1995 Original production
2
April 1996
Page IV:
Changed “100 to 240 VAC” to “AC100--240V or AC/
DC24V”.
Page 1--3: Modified the spellings in Operation indicators.
Page 1--7: Modified the diagram of mode.
Page 2--6: Modified the power specifications in “Terminal
arrangement”.
Page 2--7: Modified the diagram in “Control output“.
Page 3--2: Modified the diagram in “Setup”.
Page 3--8: Added some texts to summary of alarm operations.
Page 3--9: Changed “temperature” to “humidity”.
Added“upper and” to the text of step (4).
Page 3--12: Changed “temperature” to“humidity” in “Setting example”
Changed“
_
C” to “%” in “Setting example”.
Page 3--13: Moved a block(that was the 7th bullet) to the end of the
step (4) of “Setting example”on page 3--14.
Page 4--5: Modified the diagram in “Set point limiter”.
Page 4--7: Added some texts to “Input assignments”, “Run/Stop”
and “Auto/Manual”.
Page 4--11: Changed a text in the diagram.
Page 4--12: Added text to Preparations.
Page 4--15: Modified the diagram in “Preparation”.
Page 4--17: Modified the diagram in “Preparation”.
Changed “voltage” to “current” in step (9).
Page 4--18: Modified the diagram in “Preparation”.
Page 4--20: Modified the diagrams on this page.
Page 5--2: Added some texts to the meanings of the model icons.
Page 5--3: Added some texts to the comment descriptions.
Page 5--5: Added some texts to Manual Mode.
Page 5--6: Added some texts to Level 0 Mode.
Page 5--7: Deleted “Related parameters”in “Set point during SP
ramp”.
Page 5--17: Deleted some texts in “LBA detection time”.
Page 5--18: Added a sentence to the Function descriptions.
Page 5--27: Changed “SP setting” to “Set point”on the table.
Page 5--30: Added some texts to Condition A:.
Page 5--34: Changed the descriptions of “Related article”.
Page 6--3: Changed the diagram of RS--232C.
Page 6--7: Changed “--999.9” to “--199.9”in the parameters No.53
and 54.
Page 6--9: Added a sentence to Run/Stop.
Page 6--10: Added the“End code“.
Page 6--13: Changed the program address No. “1110” to “1120”.
Page 7--6: Changed “Not possible only with 40%AT” to “40%AT”on
the table.
Page A--2: Changed the table of “Ratings”.
Page A--3: Changed “0.1%FS” to “0.01%FS” in the description of
Hysteresis on table.
Page A--5: Added some texts to the diagram.
Page A--6,7:Modified the setting list table.
Page A--10: Changed the descriptions of “ SRT Startup Conditions ”.
Page A--13: Modified the list table of “Model list”.
2A
July 1996
Page 6--9: Changed the table of “Instruction Code”.
2B
September 1996 Page 1--7: Modified the diagram in “Selecting modes”.
Page 5--33: Changed the Event Input Operation “ON:Run” to
“OFF:Run”.
Page A--2: Added text to *1.
Page A--8: Modified the diagram in “PARAMETER OPERATIONS
LIST”.
Page A--10: Changed the letter “k” to “K”.