![background image](http://html1.mh-extra.com/html/omron/e5-k-series/e5-k-series_manual_742538039.webp)
E5AK/E5CK/E5EK
E5AK/E5CK/E5EK
130
Precautions
PRECAUTIONS WHEN WIRING
•
Use wire ducts to separate input leads and power lines in
order to protect the Controller and its lines from external
noise.
•
Solderless terminals are recommended when wiring the Con-
troller.
•
Tighten the terminal screws using a torque no greater than
0.78 N
m, or 8 kgf
cm max. Take care not to tighten the
terminal screws too tightly.
Power Blocks
The E5AK/E5EK has independent power supplies for each of the terminal blocks shown below.
10
9
8
7
6
5
4
3
2
1
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
31 32
33
*
*
10
9
8
7
6
5
4
3
2
1
20
19
18
17
16
15
14
13
12
11
21 22
23
E5AK
E5EK
Note: Terminals 21 and 22 of the E5EK belong to the B block when a transfer output is set to option 1 and to the C block for other
Option Boards.
*
*
1
2
3
4
5
13 14 6
7
8
9
10
11 12
E5CK
*
* Uses same internal power supply
*
OPERATING ENVIRONMENT
•
Keep within the rated ambient operating temperature, ambi-
ent operating humidity, and storage temperature ranges.
•
Use the Unit according to the vibration resistance, shock
resistance, and enclosure ratings.
•
Do not use the Unit in places with corrosive gas or excessive
dust.
•
Do not use the Unit near machines generating high-frequen-
cy noise.
CORRECT USE
Mounting
•
The dimensions of the Digital Controller conform to DIN
43700.
•
Recommended panel thickness is 1 to 8 mm.
•
Mount the Unit horizontally.
Connection
•
To reduce inductive noise influence, the lead wires connect-
ing the input type to the Digital Controller must be separated
from the power lines and load lines.
•
Use the specified compensating conductors for thermocou-
ples. Use lead wires having a small resistance for platinum
resistance thermometers.
Connection Example
•
Wire the terminals of the Unit using solderless terminals.
•
The tightening torque applied to the terminal screws of the
Unit must be approximately 0.78 N
m or 8 kgf
cm.
Use the following type of solderless terminals for M3.5 screws.
7.2 mm max.
7.2 mm max.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com