![background image](http://html1.mh-extra.com/html/omron/e3nc/e3nc_operation-manual_741093014.webp)
10
E3NW-ECT EtherCAT Digital Sensor Communication Unit Operation Manual (E429)
Precautions for Safe Use
Observe the following precautions when using the Unit.
Power Supply
•
Always use the power supply voltage specified in this manual. An incorrect voltage may result in
malfunction or burning.
•
Take appropriate measures to ensure that the specified power with the rated voltage and
frequency is supplied. Be particularly careful in places where the power supply is unstable. An
incorrect power supply may result in malfunction.
•
Always turn OFF the power supply to the PLC, Slave Units and other Units before attempting any
of the following. Not turning OFF the power supply may result in malfunction or electric shock.
•
Assembling any Units (Expansion Units).
•
Removing or attaching the terminal blocks or connectors to Slave Unit.
•
Replacing parts (e.g., relays).
•
Setting the DIP switch or the node address switches
•
Connecting cables or wiring the system.
Installation
•
Before touching a Unit, be sure to first touch a grounded metallic object in order to discharge any
static build-up. Not doing so may result in malfunction or damage.
•
Make sure that the terminal blocks, communications cables, and other items with locking devices
are properly locked into place. Improver locking may result in malfunction.
•
Mount the Units securely using DIN track.
•
Make sure that all Slave Unit mounting screws and cable connector screws are tightened to the
torque specified in this manual. Incorrect tightening torque may result in malfunction.
•
Make sure that all terminal block screws are tightened to the torque specified in this manuals.
Incorrect tightening torque may result in fire, malfunction, or failure.
•
Always use the specified communications cables and connectors.
•
Do not extend connection distances or the number of connected nodes beyond the ranges given
in the specifications.
•
When there are multiple systems, keep the cables unbundled and separated by at least 5 mm to
prevent unstable operation due to interference.
Wiring
•
Turn the power on after checking that the wiring and switch settings are correct.
•
Use the correct wire tools to wire the Unit.
•
Confirm the polarity of all terminals before wiring them.
•
Do not allow foreign matter to enter the Units when wiring and installing the Units.
•
Observe the following precautions when wiring the communications cable.
•
Separate the communications cables from the power lines or high-tension lines.
•
Do not bend the communications cables past their natural bending radius.
•
Do not pull on the communications cables.
•
Do not place heavy objects on top of the communications cables.
•
Always lay communications cable inside ducts.
•
Turn OFF the power of PLC and all the Slave Units before wiring the communication cables.
•
Do not apply voltages to the Input Slave Units in excess of the rated input voltage. Excess voltage
or loads may result in burning.
Содержание E3NC
