Omron E3G - Скачать руководство пользователя страница 11

Страница: 11 / 14

A-129

E3G

• Changing to Side-pullout Cable from Vertical-pullout Cable

Design

Load Relay Contact

If a load is used that will spark when it is turned OFF (e.g. a

contactor or valve), the usually closed side may be turned ON

before the usually open side is turned OFF or vice versa. If

both usually open output and usually closed output are used

simultaneously, apply an surge suppressor to the load. (Refer

to OMRON's "Switch/Relay/Connector (PCB Product) Cata-

log" for typical examples of surge suppressors.

Wiring Considerations

Connection/Wiring

The E3G has load short-circuit protection. If load short-circuit

or like has occurred, the output turns OFF. Therefore, recheck

the wiring and switch power on again. This resets the short-

circuit protection circuit. Load short-circuit protection is acti-

vated when a current of 2 times or more of the rated load cur-

rent flows. When using an L load, use the one the inrush

current of which is less than 1.2 times of the rated load cur-

rent.

Mounting

• If Sensors are mounted face-to-face, ensure that no optical

axes cross each other. Otherwise, mutual interference may
result.

• Be sure to install the Sensor carefully so that the directional

angle range of the Sensor will not be directly exposed to in-
tensive light, such as sunlight, fluorescent light, or incan-
descent light.

• Do not strike the Photoelectric Sensor with a hammer or any

other tool during the installation of the Sensor, or the Sensor
will loose its water-resistive properties.

• Use M4 screws for Sensor installation.
• For case installation, tighten it to the torque of 1.2 Nm max.

Water Resistance

Tighten the operation cover screws and terminal block cover

screws to a torque of 0.3 to 0.5 Nm in order to ensure water

resistivity.

Pro-

ce-

dure

Operation

Remove the present cover.

Attach the E39-L129-G Terminal Protection Cover for
side-pullout cable.

Remove the clamping nut, washer, and rubber bushing
of the E3G. These are used for the side-pullout cable.

Attach the rubber bushing and cap provided with the
E39-L129-G to the E3G as replacements.

33mm

63mm

Output

(2) Ta

(3) Tb

(1) Tc

Power supply

(4)

(5)

Rubber bushing

Terminal
protection cover

Washer

Clamping nut

(Recommended example)

Rubber bushing

E39-L129-G Terminal
Protection Cover

Washer

Rubber bushing *

Cap *

Clamping nut

Note: * Provided with the E39-L129-G

(4)

(1)

(2)

(3)

All E3G Models

F502-EN2-04.book Seite 129 Dienstag, 26. Juli 2005 5:48 17

Содержание E3G -















Результаты поиска

Содержание E3G -

Отзывы:

Похожие инструкции для E3G -

Бренды по названию

Популярные бренды

Omron E3G -, Техническое описание

Результаты поиска

Содержание E3G -

Отзывы:

Похожие инструкции для E3G -

Бренды по названию

Популярные бренды