4
Standard Photoelectric Sensors
Specifications
Ratings
Item
E
3
F2-7
@
E
3
F2-R4
@
-
@
E
3
F2-DS10
@
E
3
F2-DS
3
0
@
E
3
F2-D1
@
4-
@
E
3
F2-LS10
@
4-
@
Sensing method
Through-beam
Retro-reflective
with M.S.R.
Diffuse-reflective
Wide beam
Potentiometer adjustment
Background
suppression
Power supply voltage
10 to
3
0 VDC
Current consumption
50 mA max.
3
0 mA max.
25 mA max.
3
0 mA max.
Sensing distance
7 m
0.1 to 4 m
(with E
3
9-R1S)
0.1 m
(5 x 5 cm white
mat paper)
0.
3
m
(10 x 10 cm white
mat paper)
1 m
(
3
0 x
3
0 cm white
mat paper)
0.1 m
(10 x 10 cm white
mat paper)
Standard object
Opaque:
11 mm dia. min.
Opaque:
56 mm dia. min.
–
Directional angle
3
° to 20°
–
Differential travel
(hysteresis)
–
20% max.
5% max
Black/white error
–
3
%
Response time
Operation and
Reset:
2.5 ms max.
1 ms max
2.5 ms max.
1 ms max.
Control output
Transistor (open collector), load current: 100 mA max. (residual voltage: 2 V max.)
Power reset time
50 ms
100 ms max.
50 ms
100 ms
Ambient illumination
Incandescent lamp:
3
000 lx max. / Sunlight:10000 lx max.
Ambient temperature
Operating: -25 to 55 °C / Storage: -
3
0 to 70 °C (with no icing or condensation)
Ambient humidity
Operating:
3
5% to 85% / Storage:
3
5% to 95% (with no condensation)
Insulation resistance
20 M
Ω
min. at 500 V DC between energized parts and case
Dielectric strength
1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case
Vibration resistance
10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z)
Shock resistance
Destruction: 500 m/s
2
each direction (X, Y, Z)
Degree of protection
*
1
*
1.
The IP69k test according to DIN 40 050 part 9 is intended to simulate high pressure/steam cleaning. During the test 14-16 l/min water at 80°C is sprayed onto the
sensor from different angles with 8000-10000 kPa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality.
IEC 60529 IP67, IP69K after DIN 40050-9
Light source (wave
length)
Infrared LED
(950 nm)
Red LED
(660 nm)
Infrared LED (880 nm)
Red LED
(660 nm)
Indicators
Light incident /
power indicator
for light source
(red)
Light incident
(red) /
stability (green)
Light incident / power indicator for
light source (red)
Light incident
(red) /
stability (green)
Output indicator
(orange) /
stability (green)
Sensitivity adjustment
Fixed
Adjustable
Fixed
Adjustable
Fixed
Connection method
2 m, 5 m pre-wired cable (PVC, dia. 4 mm (18 / 0.12)
*
2
) or M12-connector
*
2.
For other cable materials (e.g. PUR) contact your OMRON sales representative.
Operation mode
Light-ON or Dark-ON selectable by wiring
Weight (approx.)
Plastic
case
pre-wired
(2 m)
120 g
60 g
connector
40 g
20 g
Metal
case
pre-wired
(2 m)
180 g
90 g
connector
120 g
50 g
Circuit protection
Output short-circuit and power supply reverse polarity
Housing materials
*3
*3
.
For stainless steel types refer to separate datasheet E
3
F2 SUS
Case: ABS (plastic models) or nickel brass (metal models); lens: PMMA
