background image

1

   Smart DeviceNet Remote I/O Terminals

For more information, contact an Omron representative at 1-800-55-OMRON

Gather and Use Information for Effective 
Preventive Maintenance

Get more useful data for preventive maintenance 
when you build cost-effective parallel information 
systems for control and maintenance using Omron’s 
smart remote I/O terminals. These remote I/O 
terminals include economical expansion units that let 
you design a monitoring system for maintenance 
information.

Smart Measuring and Smart Counting

These two functions take advantage of the intelligent 
capabilities of DeviceNet. In Smart Measuring, the 
remote I/O terminals convert machine operating time 
and operational changes to data enabling monitoring 
without increasing the load between controllers. 
Smart Counting keeps track of the ON/OFF 
operations and total operating time so preventive 
maintenance can be scheduled based on service life 
estimates. The operation counter and operating time 
monitor functions cannot be used simultaneously.

What Device is Reporting Problems?

These slave units can hold comments such as device 
number, type and location to shorten troubleshooting 
by identifying fault locations and faulty devices. They 
can also be used to monitor network communication 
errors.

16-point input and output terminals, NPN or PNP 
models with DeviceNet connection

Expansion terminals available in 8-point and 16- 
point units

Input filter function eliminates noise from contact 
bounce and, using OFF response time, can capture 
pulses shorter than the communications time

Sensor inrush current protection delays accepting 
input for 100 ms after input power turns on

Inputs powered by the network power supply

Compact size saves space in control panels

Network Power Monitor function

Содержание DeviceNet DRT2-ID16









Отзывы: