background image

1

High-Coded Guard Lock Safety Door Switch

D41L

Keep your machines hygienic

• Tamper-proof safety door switch to prevent human error
• Hygienically designed switch

Unique locking mechanism prevents water 
and foreign matter from collecting
Smooth surface leaves no wiping unevenness

• Complies with ISO 14119 (Type 4/High Coded), 

ISO 13849-1 (PLe)

• ECOLAB certified

Identical mounting for left and right hinged doors

Features

Refer to 

Safety Precautions

 on page18

Large actuator tolerances

• Actuator tolerance in

longitudinal direction ± 3.5 mm,

lateral direction ± 2.0 mm

Easy latching force adjustment

• The latching force can be increased 

from 25 N to 50 N simply 

by turning the star handle 180°.

• Position I: approx. 25 N,

Position II: approx. 50 N

LED display

• Smart diagnostic 

by means of 3-color LED's

• LED red: Fault

LED yellow: Status

LED green: Power

For the most recent information on models that have been certified for 
safety standards, refer to your OMRON website.

*

The actuator is sold separately.

±3.5 mm

±2.0 mm

A high-coded safety switch is defined as one where a sensor is paired with a high level coded actuator for which more than 1,000 variations are 
available.

Содержание D41L























Отзывы: