D41L
18
Safety Precautions
Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/.
Warning Indications
Meaning of Product Safety Symbols
Alert Statements
Use only appropriate components or devices
complying with relevant safety standards
corresponding to the required performance level and
safety category. Failure to do so may result in serious
injury or death. Conformity to requirements of the
performance level and safety category must be
determined as an entire system. It is recommended to
consult a certification body regarding assessment of
conformity to the required safety level.
Do not apply DC voltages exceeding the rated
voltages, nor any AC voltages to the product.
Failure to do so may result in serious injury or death.
Install the switch and actuator in a position where the
opening of the guard door can be detected within a
safe distance. Failure to do so may result in serious
injury or death.
Do not apply force exceeding the specified holding
force (Fzh). Either install another locking component
(e.g., a hook) in addition to the product, or use a
warning measures or an indicator showing the
controlled system is locked to avid overloading the
holding force in lock mode. Failure to do so may result
in serious injury or death.
When complying with safety standards, install the
product in an appropriate manner in accordance with
ISO 14119, with due consideration of the risk of defeat
by the operator. Failure to do so may result in serious
injury or death.
Make sure that the DC power supply meets the
following items. Failure to do so may result in serious
injury or death.
- Satisfies the requirements of PELV power supply
defined in IEC 60204-1.
- Satisfies the requirements of class 2 circuits defined
in UL508.
1.
Disconnect the product from power supply when wiring the
product. Failure to do so may cause unexpected operation of
devices connected to the product.
2.
Wire the input and output terminals correctly and verify the correct
operation of the product before using the system in which the
product is incorporated. Incorrect wiring may lead to loss of the
safety function.
3.
Install the actuator in a place where it will not come in contact with
your body when opening or closing the guard door. Failure to do
so may result in injury.
4.
Do not use the product in any direction other than the specified
mounting orientations of the main body and actuator.
5.
Dispose of the product in accordance with the laws set by each
country.
WARNING
Indicates a potentially hazardous
situation which, if not avoided, will
result in minor or moderate injury, or
may result in serious injury or death.
Additionally there may be significant
property damage.
Precautions for
Safe Use
Supplementary comments on what to
do or avoid doing, to use the product
safely.
Precautions for
Correct Use
Supplementary comments on what to
do or avoid doing, to prevent failure to
operate, or undesirable effect on
product performance.
General prohibition
Instructions on unspecified prohibited action.
General instructions
Instructions on unspecified general action.
WARNING
Precautions for Safe Use
