Omron CX-One 1.1, Руководство по установке

Страница: 22 / 51

5
Support Software in CX-One Section 1-3
Online Registration from
the CX-Programmer or
other Support Software in
CX-One OMRON's CX-One website will be displayed if Help - Online Registration is
selected from the menu bar of CX-Programmer or other Support Software in
CX-One. Enter the information required for user registration according to the
site windows. Use the product key and license number given on the Software
License Agreement/User Registration Card provided with the CX-One.
Note Do not register more than once. For example, if you're returned the card, do
not register online.
Using the User
Registration Postcard
Enter the required information on the User Registration Postcard provided
with the CX-One and send the card.
Note Approximately two weeks will be required from the time the User Registration
Postcard is posted until confirmation of registration is returned to you. Down-
loading OMRON Standard Libraries and other operations allowed only for reg-
istered users will not be possible during this period.
1-3 Support Software in CX-One
1-3-1 Support Software in CX-One and Reference Manuals
The following tables lists the Support Software that can be installed from CX-
One along with the startup methods and the reference manuals for each.
Support Software
in CX-One
Outline Startup method within
CX-One
Documentation
(PDF manuals provided
in CD-ROM)
CX-Programmer Application software to create and debug
programs for SYSMAC CS/CJ/CP-series,
C-series, and CVM1/C-series CPU Units. Started from a PLC in the
CX-Integrator Network
Configuration Window. CX-Programmer Opera-
tion Manual (Cat. No.
W446)
CX-Programmer Opera-
tion Manual: Function
Blocks (Cat. No. W447)
CX-Integrator Application software to build and set up FA
networks, such as Controller Link,
DeviceNet, and CompoWay/F networks.
The Routing Table Component and Data
Link Component can be started from here.
DeviceNet Configuration functionality is also
included. Started by selecting
Tools - Network Set-
tings
from the CX-Pro-
grammer menu bar or
from a CPU Unit in the
CX-Programmer I/O
tables.
CX-Integrator Operation
Manual (Cat. No. W445)
Switch Box Utility Utility software that helps you to debug
PLCs. It helps you to monitor the I/O status
and to monitor/change present values
within the PLC you specify. Started from the CX-Pro-
grammer Tools Menu. Online Help
CX-Protocol Application software to create protocols
(communications sequences) between
SYSMAC CS/CJ-series or C200HX/HG/HE
Serial Communications Boards/Units and
general-purpose external devices. Started from a Serial
Communications Board
or Unit in the CX-Pro-
grammer I/O tables. CX-Protocol Operation
Manual (Cat. No. W344)
CX-Simulator Application software to simulate SYSMAC
CS/CJ/CP-series CPU Unit operation on
the computer to debug PLC programs with-
out a CPU Unit. --- CX-Simulator Operation
Manual (Cat. No. W366)
CX-Position Application software to create and monitor
data for SYSMAC CS/CJ-series Position
Control Units. Started from a Position
Control Unit in the CX-
Programmer I/O tables. CX-Position Operation
Manual (Cat. No. W433)
CX-Motion-NCF Application software to monitor and set
parameters for SYSMAC CJ-series Posi-
tion Control Units and Servo Drivers that
support MECHATROLINK-II communica-
tions. Started from an NCF
Position Control Unit in
the CX-Programmer I/O
tables. CX-Motion-NCF Opera-
tion Manual (Cat. No.
W436)