Omron CJ1W-NC214 -, Руководство пользователя

Страница: 8 / 11

CJ1W-NC
@@
4
8
External Interface
Name of Each Part
LED Display
LED
name
Display
color
Status Explanation
RUN Green
Lit Normal operation
Unlit The power supply is OFF, a hardware error has occurred, or the PLC detects a PCU error.
ERC Red
Lit An error is occurring.
Unlit Other than the above
ERH Red
Lit An error is occurring in the PLC.
Unlit Other than the above
1 Orange
Lit Pulse output to Axis 1 in progress (forward/reverse direction)
Flashing An error related to a connection cable, data, etc. of axis 1 has occurred.
Unlit Other than the above
2 Orange
Lit Pulse output to Axis 2 in progress (forward/reverse direction)
Flashing An error related to a connection cable, data, etc. of axis 2 has occurred.
Unlit Other than the above
3 Orange
Lit Pulse output to Axis 3 in progress (forward/reverse direction)
Flashing An error related to a connection cable, data, etc. of axis 3 has occrred.
Unlit Other than the above
4 Orange
Lit Pulse output to Axis 4 in progress (forward/reverse direction)
Flashing An error related to a connection cable, data, etc. of axis 4 has occrred.
Unlit Other than the above
A1, B1 Orange
Lit ON
Phase A/B-input status of the Axis 1 feedback counter
ON when lit, OFF when unlit
Unlit OFF
A2, B2 Orange
Lit ON
Phase A/B-input status of the Axis 2 feedback counter
ON when lit, OFF when unlit
Unlit OFF
A3, B3 Orange
Lit ON
Phase A/B-input status of the Axis 3 feedback counter
ON when lit, OFF when unlit
Unlit OFF
A4, B4 Orange
Lit ON
Phase A/B-input status of the Axis 4 feedback counter
ON when lit, OFF when unlit
Unlit OFF
AS, BS Orange
Lit ON
Phase A/B-input status of the MPG input
ON when lit, OFF when unlit
Unlit OFF
SYNC Green
Lit In the SYNCHRONOUS OPERATION mode
Unlit Other than the above
Unit number
setting switch
Set the PCU
unit number.
External signal
connector for
axes 1 and 2
Connects to
external input.
External signal
connector and
MPG connector
for axes 3 and 4
Connects to external
input and MPG.
Axes 1 and 2
connector
Connects to the
Servomotor
Drive or stepping
motor driver
(2-axis control).
Axes 3 and 4
connector
Connects to the
Servomotor
Drive or stepping
motor driver
(2-axis control).
CJ1W-NC414/-NC434 CJ1W-NC214/-NC234
LED indicator
Indicates the
operation status
of the PCU.
External signal
connector and
MPG connector
for Axes 1 and 2
Connects to
external input and
MPG.
Axes 1 and 2
connector
Connects to the
Servomotor
Drive or stepping
motor driver
(2-axis control).