EN-20
U3-09
to
U3-14
Fifth last to tenth last fault
U3-15
to
U3-20
Accumulated time of fifth to tenth fault
* The following faults are not recorded in the error log:
CPF00, 01, 02, 03, UV1, and UV2.
Digital Input Function Selections (H1-01 to H1-05)
3
Multi-step speed reference 1
4
Multi-step speed reference 2
6
Jog frequency command (higher priority than multi-
step speed reference)
F
Not used (Set when a terminal is not used)
14
Fault reset (Reset when turned ON)
19
PI control disable
20 to
2F
External fault; Input mode: NO contact/NC contact,
Detection mode: Normal/during operation
Digital Output Function Selections
(H2-01 and H2-02
0
During run 1 (ON: run command is ON or voltage is
being output)
6
Inverter operation ready; READY: After initialization or
no faults
F
Not used. (Set when the terminal is not used.)
10
Minor fault (Alarm) (ON: Alarm displayed)
1A
During reverse run (ON: During reverse run)
1F
Motor overload (OL1, including OH3) pre-alarm (ON:
90% or more of the detection level)
Param-
eter
Num-
ber
Name
Description
