![background image](http://html.mh-extra.com/html/omron/c200hw-clk21/c200hw-clk21_operation-manual_742483250.webp)
225
Commands and Responses for C200HX/HG/HE and CQM1H-series PLCs
Section 6-6
Parameters
Year, month, date, hour, minute, second, day (command):
Each specified
value is expressed in BCD.
The ranges for setting these items are shown in the following table.
Day:
As follows:
6-6-14 ERROR CLEAR
Clears errors from the PLC. A normal response will be returned even if an
error has not occurred.
Note
The cause of the error must be removed before executing the ERROR CLEAR
command or the same error will occur again after the ERROR CLEAR com-
mand is executed.
Command Block
Response Block
Parameters
Error reset code (command):
Set to FFFF (Hex).
6-6-15 FORCED SET/RESET
Forcibly sets (ON) or resets (OFF) bits/flags or releases forced set/reset sta-
tus. Bits/flags that are forced ON or OFF will remain ON or OFF and cannot
be written to until the forced status is released.
Note
This command cannot be used to release the status of Completion Flags for
timers or counters. If forced status is released and the Completion Flag is
turned ON, it will be force-set; if forced status is released and the Completion
Flag is turned OFF, it will be force-reset.
Parameters
Range
Year
00 to 99 (rightmost 2 digits)
Month
01 to 12
Date
00 to 31
Hour
00 to 23
Minute
00 to 59
Second
00 to 59
Value
00
01
02
03
04
05
06
Day
Sun
Mon
Tues
Wed
Thur
Fri
Sat
Command
code
01
21
Error reset
code
FF
FF
Command
code
01
21
Response
code
Содержание C200HW-CLK21
