16
5.
Insert 2 new battery packs into the additional battery unit as far as they will go.
➀
●
Replacement battery pack
For BUM100S : Model number BP100XS (2 required)
For BUM150S : Model number BP150XS (2 required)
Attach the plate cover.
Insert the tab at the bottom of the cover into the hole in the main body
➁
, and push the plate cover to-
wards the main body.
➂
Use a screwdriver to securely tighten (clockwise) the 3 removed screws.
Do not pinch the cable with the plate cover.
3
2
1
Tighten the 3 screws.
Caution
Do not hold the connector of cable of the battery pack.
Battery connector
Battery pack
Pullout label
(Pull here to remove the
battery pack.)
Red tape
Use the red tape on top of the battery pack,
which is 10 cm from the inner edge of the battery,
to gauge how much further you need to pull the
battery to remove it. Hold the battery securely
with both hands so as not to drop it.
Attention
Ne pas tenir le connecteur du câble de la batterie.
4.
Remove both battery packs by pulling on the pullout label at the bottom of each battery pack.