![background image](http://html1.mh-extra.com/html/omron/bum100r/bum100r_instruction-manual_744593014.webp)
14
(3) Use the 8 included rack
fi
xing screws and nuts (medium-sized) to securely fasten the front
(the side displaying “L” or “R”) and back of the support angles to the server rack. (EIA standards)
➂
For JIS standards, use 4 sets of screws and nuts to fasten the left and right support angles
(one screw and nut at the back and front of each support angle) (middle screw holes).
➂
(2) Adjust the length of support angles to suit the server rack, and then securely tighten the screws
that were half-tightened in step 1.
➁
Rack fixing screws 8 (EIA standards)
4 (JIS standards)
Adjust the length to
suit the server rack
and tighten securely.
2
2
3
3
●
BUM100R/BUM300R rack mounting procedure
(1) Insert the 4 included rail length
fi
xing screws and half-tighten them to hold the front and rear rack
rails in place.
➀
4 rail length fixing screws (small)