4
Delay OFF Rocker Switch
A8GS-T
Dimensions
(Unit: mm)
/Operating Characteristics
Note: 1.
Unless otherwise specified, a tolerance of ± 0.4 mm applies to all dimensions.
2.
At initial operation or operation after reset, operating force is increased, due to switch structure.
3.
Solder terminals model has different hole shape, comparing with Quick-connect terminals. Outline and characteristics are same.
4.
No models of switch without delay off function (without coil), due to product design.
Panel Cutout
1.3
10
19.2
18.6
0.8
15.8±0.8
16.5
27
6.
9
2
4.75
28.
5
30
22
OFF
OFF
ON
ON
CT Connector
CT Connector
A8GS-T1
@
85K
Operating force (OF)
1.8 ± 1.4 N
1.9
±0.1
4.3
±0.1
26.5
±0.1
19.5
±0.1
27.7
±0.1
R by cutting
OFF
ON
(Operating surface direction)
Edge
Panel thickness: 0.8 to 2.3 mm
Panel cutout design is for prevention of false insertion.
Please be careful about the direction of the protrusion.
The rollover of the panel shall be on the front face.
And panel back side shall be Edge shape by processing.
Note: 1.
Recommendation panel material is "SPCC", however, in case of soft material or Panel back side shape is not edge, mounting strength may down.
Please check and try by actual mounting panel and set the Panel thickness and hole dimension.