Delay OFF Rocker Switch
A8GS-T
1
Delay OFF Rocker Switch
A8GS-T
Minimum size class in the industry Remote Reset
Rocker Switch with Delay OFF Function
• Rocker switch with Delay OFF Function. Switch is kept to turn ON,
even if button is operated to turn OFF, and Switch is turned OFF by
external signal.
• Zero standby power with Reset function, switching OFF by external
signal.
• Preventing from application trouble such as a data lost or circuit
damage by forced power OFF.
• Timing control of main power switch turn OFF for safety application
design with Delay OFF function.
• Contact gap of 3 mm minimum.
• UL and cUL standard approved, Conforming to EN standards.
• RoHS Compliant.
* There are 2 kinds of main models A8GS. (Delay OFF Function model and Remote Reset model) With regard to the models with Remote Reset Function, please refer to A8GS datasheet.
Ordering Information
Note: 1.
This is not general 3 pole switch.
(1) Signal contact terminal is only for detecting button ON/OFF.
(2) Power contact terminal is for turning ON/OFF of circuit. Switch is turned OFF by external signal only, after turning OFF of button.
Specifications
■
Contact Ratings
Note: 1.
The above ratings were tested under the following conditions:
(1) Ambient temperature: 20 ± 2 °C
(2) Ambient humidity: 65 ± 5 % RH
(3) Switching frequency: 7 times/min
■
Contact specifications
* Please refer to '' Using Micro loads'' in ''Precautions'' for more information on
the minimum applicable load.
Contact Form
1 to 4: Power contact terminal
a, b: Signal contact terminal
+, -: Coil terminal
Signal Contact Terminal: SPST + Power Contact Terminal: DPST
Quantity
per box
Signal Contact Terminal
×
1 + Power Contact Terminal
×
2
Terminals
Signal Contact Terminal: CT Connector
Power Contact Terminal: Quick-connect terminals
#187(t=0.8)
Signal Contact Terminal: CT Connector
Power Contact Terminal: Solder terminals
Marking on caps
No Marking
A8GS-T1185K
A8GS-T1115K
50
A8GS-T1285K
A8GS-T1215K
A8GS-T1385K
A8GS-T1315K
+
3
4
-
1
2
a
b
Rated voltage
Rated current
(Resistive load)
Power Contact Terminal
125 VAC
16 A
250 VAC
10 A
Signal Contact Terminal
5 VDC
0.2 A
Signal contact
Power contact
Material
Gold alloy
Silver alloy
Contact gap
3 mm
3 mm
Minimum applicable
load (Reference value) *
3 VDC 1 mA
5 VDC 200 mA
