Polarizer Kit Hardware, MicroHAWK ID-20/MV-20
Qty
Description
Kit Part Number
1
Kit, Polarizer, MicroHAWK ID/MV-20
98-9000062-01
Polarizer Kit Installation, MicroHAWK ID-20/MV-20
Step 1:
Peel the protective liner from adhesive on the polarizer.
Step 2:
Rest the narrow edge of the polarizer on the bottom edge of the window opening at an angle as
shown below.
Step 3:
Center the polarizer left-to-right in the window opening.
Step 4:
Affix the polarizer to the window.
Step 5:
Run your finger over the surface of the polarizer using light pressure to complete the bond.