9
6. Ethernet FINS Connection Procedure
This section describes the procedure for connecting NSJ to the G9SP via Ethernet FINS.
6.1. Setting up the NSJ and Ethernet Communication Unit
Set up the PLC and Ethernet Communication Unit.
6.1.1. Hardware Settings
Set the hardware switches on the PLC and Ethernet Unit.
Precautions for Correct Use
Make sure that the Power Supply is OFF when you perform the setting up.
1
Make sure the Power Supply to
the PLC and the Switching hub
are OFF.
2
Check the positions of the
hardware switches on back of
NSJ unit.
Unit No: 1
Node Adr: 98
3
Check the positions of the
hardware switches on the
Ethernet communication unit.
Unit No: 0
Node No: 2