![background image](http://html1.mh-extra.com/html/omron/3g3ax-mx2-drt-e/3g3ax-mx2-drt-e_user-manual_740780038.webp)
24
Controlling Inverter Torque
Section 4-4
Step 1
Configure the Option Board and Network as explained in sections
3-1 Installa-
tion of EDS files
and
3-2 Configuring the Option Board
with Control IO and
Multi function IO monitor (Output assembly 101, Input assembly 151). There
are two options:
• When using Fixed allocation method of configuring the master, select
P046 = 4.
• When using User-set allocation, select the two Extended Control IO and
Multi-function IO monitor assemblies.
Step 2
Set C003 = 52 (ATR: permission of torque command input) to assign intelli-
gent input terminal 3 as torque enable. See also section
4-3 Overriding
Inverter inputs
Step 3
Set parameter A044=3 to enable Sensorless Vector Control (SLV).
Step 4
Set parameter P033=6 to assign Torque command input selection to Option
Board.
Step 5
Restart the Inverter or reset the Option Board for the new settings to take
effect.
Note
The Inverter will only allow setting of torque related registers if it is configured
to operate with CT rating in Std. IM mode.
Your input and output process areas should now have the following layout:
Step 6
Set the maximum allowable output frequency in torque mode by configuring
P039 and P040 for the forward- and reverse run directions. Be careful to
select safe limits for your test setup.
Table 16 Extended Speed Torque I/O Output Words
Word
Bit Allocation
7
6
5
4
3
2
1
0
15
14
13
12
11
10
9
8
Instance ID 123:
Extended Speed and Torque Control Output
n
-
CI7 CTR CI5
CI4
CI3 REV FWD
CO2 CO1
CR
-
-
-
RST FFL
n + 1
Rotational Speed Reference (default [0.01 Hz])
Rotational Speed Reference
n + 2
Torque Reference [1 %]
Torque Reference
n + 3
Torque Compensation Bias [1 %]
Torque Compensation Bias
Bit
Name
Description
FWD
Forward/Stop
0: Stop
1: Forward
REV
Reverse/Stop
0: Stop
1: Reverse
RST
Fault Reset
Reset Fault/Trip condition on transi-
tion from 0 to 1
FFL
Force Fault
Force external fault/trip from network
CI3 to
CI7
Control/Override
Input
0: Reset 1: Set override for Multi
Function input 3 to 7.
CO1,
CO2,
CR
Set (Relay) Output 0: Reset 1: Set Multi Function 1 to 2
or Relay Output (CR).
Table 17 Extended Speed Torque I/O Input Words
Word
Bit Allocation
7
6
5
4
3
2
1
0
15
14
13
12
11
10
9
8
Instance ID 71: Extended Speed Control Input
n
FLT
WR RDY ARF
-
DRR DZS DFR
-
-
MO2 MO1 MR CFN
-
-
n + 1
Rotational Speed Monitor (default [0.01 Hz])
Rotational Speed Monitor
n + 2
Torque actual [1 %]
Torque actual
n + 3
Output current monitor [0.1 A]
Output current monitor
n + 4
-
MI7
MI6
MI5
MI4
MI3
MI2
MI1
-
-
-
-
-
-
-
-
Bit
Name
Description
DFR
During forward run 0: Stop/reverse
1: During forward run
DZS
During zero speed 0: Non-zero speed
1: During zero speed
DRR
During reverse run 0: Stop/forward
1: During reverse run
ARF
At reference
0: Accel/decel phase
1: At reference
RDY
Inverter ready
0: Inverter not ready
1: Inverter ready
WR
Warning
0: Normal
1: Warning
FLT
Fault
0: Normal
1: Fault/Trip
CFN
Control from net
Run command input selection
(0: local, 1: DeviceNet)
MO1,
MO2,
MR
Monitor (Relay)
outputs
0: OFF
1: ON
Содержание 3G3AX-MX2-DRT-E
