OMP 60

    Models are not insurable but operators are.  You can obtain coverage through membership in the 
Academy of Model Aeronautics (AMA).  For an AMA information package call 1-800-435-9262, ext. 
292 or visit the AMA website at "

www.modelaircraft.org

". 

 

By the act of using the final assembled model, the purchaser/operator accepts 

all resulting liability.

 

 
  

OHIO MODEL PRODUCTS WARRANTY AND RETURN POLICY 

 

Ohio Model Planes guarantees this product to be free from defects in both material and 

workmanship at the date of purchase.  This does not cover any parts damaged by use, misuse or 
modification.  In no case shall OMP's liability exceed the original cost of this kit.  Because OMP has no 
control over the final assembly or equipment/components used in the final assembly, no liability shall be 
assumed for any damage resulting from the use of this model by the user.  

By the act of using the final 

assembled model, the user accepts all resulting liability.  

If you should find any missing or damaged 

parts, or have any questions about this product, please contact OMP within 30 days of the purchase in 
order to be covered by our warranty.  You may contact OMP a

[email protected]

 or call 

OMP at (937) 372-0603.  If you wish to return this product you must first contact OMP and a 15% 
restocking fee will be assessed.  Only unused products may be returned. The customer is responsible for 
all return shipping charges both ways and any damage as a result of misuse or shipping.  

 

Содержание 60" Sbach 342

















Отзывы: