Omnivision OV-7204, Руководство пользователя

Страница: 24 / 48

OV-7204 / OV-7208 H.264 DVR User Manual
20
SMTP : the server address of the mailbox used, for example, the SMTP server of the
Yahoo mailbox is smtp.mail.yahoo.com.cn; please check this address to your mailbox
supplier.
SEND EMAIL : the mailbox address used to send mails, the
above-mentioned SMTP server is also the server of the corresponding sender address.
SEND PW : the password of the mailbox used to send mails.
RECV EMAIL : the address used to receive the picture transmitted after the DVR
motion detection alarm. If the alarm frequency of the system is high, the number of
pictures sent will also be larger. Please pay attention to the space of your mailbox
timely lest the normal operation of the mailbox be affected due to an excess number of
pictures.
3.7.2 System info
Enter the System Info screen from “Main Menu”
→
“Advanced Functions”, as shown
below:
You can inquire about the software version number, whole unit version number, MAC
address and serial number in this screen.
3.7.3 Motion detection
Enter the Motion Detection screen from “Main Menu”
→
“Advanced ”, as shown below:
MD Channel and STATUS : Each channel has a corresponding switch. Press “Enter” to
select motion detection “On” or “Off”.
SENSITIVITY : Each channel has a corresponding sensitivity setting, with the 4 levels
of 1, 2, 3 and 4, in which 4 is the highest. Press “Enter” for changeover.
MD AREA: Each channel has a corresponding motion detection area setting. Move the
cursor to “Setup” of the corresponding channel, and press “Enter” to enter the motion
area setup screen of this channel, where a red block indicates motion detection is