Omnitronic XCP-2800MT, Руководство пользователя

Страница: 34 / 36

00075263.DOC, Version 1.0 34/36
Playing a continuous loop
A section within a title can be repeated as a
seamless continuous loop as many times as
desired. This loop can be overwritten at any time
and is deleted when selecting another title,
changing the CD or switching the unit off and on
again.
1
In play mode, shortly actuate the button IN
when the desired starting point of the loop is
reached.
• Playback is not interrupted.
• The button flashes blue.
• “LOOP“ flashes repeatedly in the display.
2
Shortly actuate the button OUT when the
desired end point of the loop is reached.
• The section between the starting point and
the end point of the loop is continuously
repeated.
• The LEDs of the buttons IN and OUT will
light up.
• The insertion “LOOP“ lights permanently.
3
To exit the loop and to continue the title,
press the button OUT.
• The button IN will flash to indicate that the
loop has been memorized and is ready to be
engaged.
• The illumination of the button OUT and the
insertion “LOOP“ in the display will be
extinguished.
• By selecting another title it is also possible to
exit the loop.
4
To restart the loop, press the button
RELOOP.
• The buttons IN and OUT will light up again.
5
To program another loop, redefine the
starting and the end point with the button IN
and OUT.
Selecting repeat functions
With the button REPEAT two different repeat
functions can be selected:
• first actuation of the button: continuous repeat of
the selected title (indication "REPEAT 1")
• second actuation of the button: continuous
repeat of all titles of the CD (indication
"REPEAT ALL")
• third actuation of the button: return to normal
play
Programming an individual title
sequence
For playing selected titles in a certain order, an
individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by
changing the CD or switching the unit off and on
again.
1
In pause mode, press the button PGM to
activate the programming mode.
• The insertion “PROGRAM“ will come on
flashing
• Additionally, the display will indicate the first
memory location number “P01“ on the left
and the title number “–“ next to it
2
Use the buttons [  ] and [  ] to select the
first title for the title sequence.
3
After the title selection, press the button
PGM to confirm the selection.
• The display will show the second memory
location number P02.
4
Proceed in the same way for all further titles
until the title sequence has been
programmed.
5
To start the playback of the title sequence,
press the button [
► II ] repeatedly.
• The display will show “PROGRAM”.
6
To add further titles to the title sequence,
follow steps 1 to 5.
7
To delete the title sequence and to continue
normal play, keep the button PGM pressed
until the insertion "PROGRAM" will be
extinguished.