00073641.DOC, Version 1.0
27/34
If inclined tension cables or prolonged outriggers are used, the area of danger has to be marked or even be
blocked.
Before lifting or lowering the telescopic tubes, always block a safety area around the stand or satellite
system. This safety area must have a diameter of 1.5 times the maximum height.
Lifted telescopic tubes always have to be secured with a secondary securing!
The total weight of the installation (=total weight of all individual parts) must never exceed the maximum load
of the installation area.
The stand has to be installed out of the reach of people.
An unintended movement of the load has to be avoided – also in case of fire!
The installer is responsible for adhering to the carrying capacity given by the manufacturer, the safety
requirements and the qualification of possible co-workers.
When people are located below the load, all necessary safety measures have to be taken in order to avoid
injury.
The personnel has to be instructed on the content of the user manual and on the dangers related with
operating stands.
Depending upon the individual installation spot, all necessary measures against movement and for securing
the standing safety have to be created.
The installation is only allowed on carrying areas. In some cases, an appropriate substructure, e.g. via an
balancing foot, has to be created.
When choosing the installation material, optimum dimensions have to be chosen in order to secure
maximum safety.
DANGER!
If installing on slippery surfaces, the legs must be secured with screws or nails via the provided
holes or a anti-slippery mat has to be used.
Installation of the TV pin with stands
Attach an appropriate TV pin to the top end of the stand and fasten it with the handle at the side. Suitable TV
pin: EUROLITE TV-35 TV-pin for speakers, No. 60000735.
Installation of the speaker system
Install the speaker system via the flange on the speaker stand or via the TV pin on the stand. The load has
to be installed in a balanced way. The carrying capacity of the stand or speaker stand must never be
exceeded! Make sure that the maximum lifting height of the tube is never exceeded. Lifted telescopic tubes
always have to be secured with a secondary securing!
