11038885_V_1_0.DOC
24/31
Please note:
you must only connect one kind of signal to a mono channel – either mic or line.
At the stereo input channels, the signals are connected via the jack sockets or via the RCA-sockets.
You can also run a stereo channel in mono when you only connect the left input socket.
MIC
Here, you can connect dynamic microphones.
MIC/LINE
Here, you can connect mic signals or line-signals.
The connections can be via balanced XLR-cables or via balanced or unbalanced jack plugs.
Occupation balanced XLR-connection:
2
1
3
1
2
3
Balanced use with XLR connectors
1 = Ground / Shield
2 = Hot (+)
3 = Cold (-)
For unbalanced use pin 1 and pin 3 have to be bridged
Input
Output
Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Balanced use of
Tip =
hot (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
stereo 1/4" jack plugs
Ring =
cold (-)
Ring
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
SPEAKER OUT
The Speaker Out socket can be connected via jack plug. The signals of this output socket are behind the
amplifier and must only be connected to one speaker-system with 8 Ohms impedance. Please note that this
socket switches the internal speakers off.
LINE OUT
Output socket for connecting further active systems via balanced or unbalanced jack plugs.
