10006750_V_1_1.DOC
28/28
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
2 x 30 V AC ~
Power consumption:
35 W
Inputs:
2 phono, 10 line, 3 mic
Outputs:
2 Master, 1 Booth, 1 Rec
Minimum input voltage:
Microphone:
1 mV RMS
Phono:
3 mV RMS
Line:
150 mV RMS
Output voltage:
Master 1:
0.75 V/1.5 V RMS or XLR
Master 2:
0.75 V/1.5 V RMS or XLR
Booth:
0.75 V/1.5 V RMS
Record:
0.75 V RMS
Headphones:
8 Ohms or more
Outputs:
2 Master-Out, 1 Rec-Out, 1 Booth-Out via RCA
Master 1 Out:
via 2 additional, balanced XLR-connectors
Master 2 Out:
via 2 additional, balanced XLR-connectors
Booth Out:
via 2 additional 1/4" mono-jack-connectors
Frequency range:
20 - 20 000 Hz
Distortion:
<0.03 %
S/N-ratio:
>75 dB
Talkover-attenuation:
-15 dB
Tone control:
Middle:
40 Hz - 10 Khz (7 Band EQ)
MIC Tone control:
Treble:
10 KHz - 12 dB bis +12 dB
Middle:
1 KHz - 12 dB bis +12 dB
Bass:
100 Hz -12 dB bis +12 dB
Dimensions (WxDxH):
482 x 220 x 100 mm
Weight:
4 kg
Please note: Every information is subject to change without prior notice. 11.04.2006 ©
