Omnitronic MRS-502USB, Руководство пользователя

Страница: 16 / 20

16
14 Level control
To add the signal of channel 1 to the master signal.
15 CLIP indication
Lights in case overload of channel 1.
16 Tone controls
For adjusting the high and low frequencies for channel 2.
17 Balance control
For adjusting the balance left/right for the stereo signal for channel
2.
18 Level control
To add the signal of channel 2 to the master signal.
19 Level control MONITOR
For adjusting the monitoring level at the headphones output.
20 CLIP indication L/R
Lights in case overload of the monitoring signal.
21 Master level control
Level control for the master signal sent to the outputs MASTER
OUT, TAPE OUT and the USB jack.
22 Power switch PWR
23 USB port
For connection to a computer. The USB port allows transmission of
digital audio signals in both directions between the mixer and the
computer and supplies power to the mixer.
Use as input: Press the button USB/LINE to switch the audio signal
coming from the computer to channel 2.
Use as output: The USB port sends the digital master signal.
When operating the mixer without a computer, connect the included
power supply unit to supply power to the mixer.