Omnitronic MRS-502USB, Руководство пользователя

Страница: 15 / 20

15
1 Microphone/line input
Combo input (XLR/6.3 mm jack) for channel 1 for connecting a
microphone or an audio unit with mono line output (e.g. music
instrument). A 20 V phantom power is available at the XLR jack
which most condenser microphones require. Do not connect
microphones with unbalanced output here as they may be damaged
by the phantom power.
2 Line input
Stereo input (RCA L/R) for or channel 2 for connecting audio units
with line level (e.g. CD player).
3 Input TAPE IN
Stereo input (RCA L/R) for connecting the output of a recorder or
another playback unit (e.g. CD player).
4 Output TAPE OUT
Stereo output (RCA L/R) of the master signal for connecting the
input of a recorder or an amplifier.
5 Output MASTER
Stereo output (3.5 mm jack) for connecting an amplifier or active
speaker.
The output provides the output signal adjusted with the
master control.
6 Power indicator
7 Headphones output
3.5 mm jack for connecting stereo headphones (impedance min. 8
Ω) or an amplifier of a monitor system for monitoring the master
signal or the signal at the input TAPE IN.
8 Button MONITOR OUT
Selects the signal for the headphones output (button not pressed =
master signal, button pressed = signal at the input TAPE IN).
9 Button TAPE TO MAIN MIX
Press the button to switch the signal of the input TAPE IN to the
master channel.
10 Button USB/LINE
Selects the input signal for channel 2 (button not pressed = signal of
the jacks LINE IN 2, button pressed = signal of the USB jack).
11 Control GAIN
For adjusting the input amplification of channel 1.
12 Tone controls
For adjusting the high and low frequencies for channel 1.
13 Panorama control
To place the mono signal in the stereo sound for channel 1.