Omnitronic MES-12BT2, Руководство пользователя

Страница: 21 / 32

21
3
OPERATING DETERMINATIONS
Power Supply
The PA system can be operated with 230 V, 50 Hz
mains voltage, via the optional rechargeable battery
(12 V, 7 Ah) or via 12 V direct current from an external
source). The battery can be charged with the integrated
charging part. The wireless microphones operate with
two 1.5 V mignon batteries or 1.2 V rechargeable
batteries and the IR remote control with a CR2025
button cell. The devices were designed for indoor use
only.
The occupation of the power connection cables is as
follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth has to be connected! If the device will be
directly connected with the local power supply network,
a disconnection switch with a minimum opening of 3
mm at every pole has to be included in the permanent
electrical installation. The device must only be
connected with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual Current
Device (RCD) with a maximum fault current of 30 mA.
Public and Industrial Use
Operating an amplification system in public or industrial
areas, a series of safety instructions have to be
followed that this manual can only give in part. The
operator must therefore inform himself on the current
safety instructions and consider them.
Maximum Power
The maximum power of the PA system must never be
exceeded. When operating the speaker system, please
make sure that the loudspeakers always sound well.
When distortions can be heard, either the amplifier or
the loudspeaker is overloaded. Overloads can quickly
lead to amplifier or speaker damage. In order to avoid
damage, please reduce the volume immediately when
distortions can be heard. When speaker systems are
destroyed by overload, the guarantee becomes void.
Ambient Conditions
This device must never be operated or stockpiled in
surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity
can reduce the insulation and lead to mortal electrical
shocks. The ambient temperature must always be
between -5° C and +45° C. Keep away from direct
insulation (particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C. This device must only be
operated in an altitude between -20 and 2000 m over
NN. When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and is
installed in a distance of 0.5 meters between smoke
machine and device.
Installation
Do not shake the device. Avoid brute force when
installing or operating the device. When choosing the
installation spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. There
should not be any cables lying around. You endanger
your own and the safety of others! This speaker system
must only be installed at a solid, plane, anti-slip,
vibration-free, oscillation-free and fire-resistant location.
Operate the device only after having familiarized with its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are
the result of unprofessional operation!
Transport
Please use the original packaging if the device is to be
transported.
Cleaning
Never use solvents or aggressive detergents in order to
clean the device! Rather use a soft and damp cloth.
Serial Barcode
Never remove the serial barcode from the device as
this would make the guarantee void.
Modifications and Guarantee
Please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If
this speaker system will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may
lead to dangers like crashes, hearing loss etc.
Approval
This system is intended for use in the EU. The
operation range is license-free in Germany and 13
other EU countries. This system may require a
ministerial license in certain areas. Prior to use, make
sure that the desired frequencies are approved and
legal in your country. Consult your national authority for
possible requirements.