19
•
EN
No.
Element
Function
1
Level control
Adjusts the volume for the satellite speakers.
2
Level control
Adjusts the volume for the subwoofer.
3
Bluetooth on/off
Depress this button to turn on the Bluetooth receiver (status indicator
lights up); unlock this button to reset the Bluetooth connection.
4
Status
indicators
LIMIT: The signal level is too high; the limiter will reduce the signal level
to protect the speakers. Reduce the volume until the LED does not light
anymore, or only at signal peaks.
SIGNAL: Input signal is present.
ON: Speaker is powered on.
5
Signal input
Additional stereo input on unbalanced RCA jacks. Use a standard
stereo RCA cable to connect a line-level device to this input. Use the
SENSITIVITY switch to adjust the input level for the signal source.
6
Signal input
Balanced stereo inputs with combo connectors. Use standard XLR or
6.3 mm jack cables to connect audio units with line level output (e.g.
mixers or preamplifiers) to these inputs. When connecting a mono
device, only use the left jack and depress the mono/stereo switch.
7
Feed-through outputs
Balanced XLR jacks, connected in parallel to the inputs, to connect
another device, e.g. a further active speaker system.
8
Sensitivity switch
To match the level for units with a low output level at the RCA inputs.
With the button engaged, the input level is boosted by 5 dB.
9
Speaker connectors
High-pass filtered speaker jacks for connecting the left and right satellite
speaker.
10
Fan
Do not cover to avoid overheating.
11
DSP PRESET switch
To select various equalizer presets according to your application: Flat =
frequency response is not affected, DJ = increased presence and bass,
LIVE = low and high frequency boost.
12
Operating mode switch
Depress this button to activate mono operation; unlock this button for
stereo operation.
13
Charging port
To charge the batteries of mobile devices up to max. 5V/2 A.
14
Power switch
Turns power to the PA system on and off.
15
Power input
Used to plug in the supplied power cord.
16
Fuse holder
Only replace the fuse when the device is disconnected from mains. Only
use fuses of the same rating and power. The correct fuse value is
specified on the rear panel.
17
Swivel castors (optional)
The enclosure is provided with recesses for mounting the optional
castors.
