Omnitronic LI Series, Руководство пользователя

Страница: 16 / 20

16
5
INSTALLATION
The speaker system can be set up as desired or it can be fastened to the wall
via the included mounting bracket. The installation area must hold a minimum
point load of 5 times the system's load (e.g. weight 20 kg - point load 100 kg).
The installation of the device has to be built and constructed in a way that it
can hold 5 times the weight for 1 hour without any harming deformation.
The device must only be installed absolutely planar at a vibration-free,
oscillation-free and fire-resistant location. Make sure that the device is
installed absolutely planar by using a water level.
The device must be installed out of the reach of people.
The durability of the installation depends very much on the material used at
the installation area (building material) such as wood, concrete, gas concrete,
brick etc. This is why the fixing material must be chosen to suit the wall
material. Always ask a specialist for the correct plug/screw combination
indicating the maximum load and the building material.
This device is only allowed for an installation via the installation equipment. In
order to safeguard sufficient ventilation, leave 50 cm of free space around the
device.
Please note: When using this speaker system in public or industrial areas, a
series of safety instructions have to be followed that this manual can only give
in part. The operator must therefore inform himself on the current safety
instructions and consider them.
Make sure that the area below the installation place is blocked when installing, uninstalling or servicing the
fixture.
When installing, uninstalling or servicing the speaker staying in the area below the installation place, on
bridges, under high working places and other danger zones is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! Overhead rigging requires extensive experience, including (but not limited to) calculating
working load limits, installation material being used, and periodic safety inspection of all installation material
and the device. If you lack these qualifications, do not attempt the installation yourself, but instead use a
professional structural installer. Improper installation can result in bodily injury and or damage to property.
Caution: Devices in hanging installations may cause severe injuries when crashing down! If you have
doubts concerning the safety of a possible installation, do NOT install the device!