10007125.DOC
16/20
10. CUE SPLIT BUTTON
Cue Split-function (button pressed and): the Cue-signal is on the one side of the headphones and the output-
signal on the other side.
Cue Mix-function (button released): the adjustable mix of Cue-signal and output-signal is on both sides of the
headphones.
11. HEADPHONES-SOCKET
Use this socket to connect the headphones. Headphones from 8 Ohms to 600 Ohms can be used.
12. BOOTH-CONTROL
The EM-760 features a DJ BOOTH monitor system. Connect your monitor system with the BOOTH-sockets
on the rearpanel.
13. STEREO / MONO-SWITCH
Used to set the master output to mono or stereo. If you connected a mono-signal via 1 RCA-socket, you can
switch the output signal to STEREO in order to have a stereo output signal.
14. REC OUT
To connect your recording unit.
15. LINE INPUT-SOCKETS
Connect CD-players or Tape Decks connected with LINE input-sockets. Line level musical instruments with
stereo outputs such as Rhythm Machines or Samplers should also be connected with the LINE input-
sockets.
16.
CHANNEL DISPLAY
The display shows the individual channel signal.
17. OUTPUT LEVEL-CONTROL
With the OUTPUT LEVEL-control, you can adjust the output level of the individual channel.
18. PHONO / LINE / MIC-SWITCH
Used to select the input to be sent to the individual channel.
19.
TREBLE-CONTROL
Used to increase or lower the HIs of the output signal.
20. GAIN-CONTROL
Used to set the level of the input signal
21. TALKOVER-BUTTON
Press this button if you want to use your microphone. When the button is pressed, all signals but the
microphone level are attenuated by 15 dB.
22. ON AIR-BUTTON
23. MIC LEVEL-CONTROL
With the MIC LEVEL-control, you can adjust the microphone volume.
24. MIC MASTER-BASS-CONTROL
Used to increase or lower the LOWs of the output signal.
25. MIC TREBLE-CONTROL
Used to increase or lower the HIs of the input signal
