Omnitronic DMP-102, Руководство пользователя

Страница: 22 / 28

00055966.DOC, Version 1.0 22/28
21
Play/pause mode
22 Title number
23 Elapsed or remaining title time
24 Infrared sensor for the remote control
25
Buttons IN, OUT and RELOOP
Buttons to memorize and play a seamless continuous
loop.
• IN: Sets the starting point of a loop (LED flashes
orange).
• OUT: Defines the end point of a continuous loop which
is instantly started (LEDs IN and OUT are flashing). The
loop will continue to play until the button OUT is
pressed once again.
• RELOOP: Starts the loop once again (LEDs IN and
OUT are flashing)
26
Button CUE
• When pressing the button in pause mode and during
playback the unit stops and returns to the starting point
of the title (cue point) and is in pause mode (button
lights LED red).
• When keeping the button pressed after jumping to the
cue point, the title is momentarily played. As soon as
you release the button, the unit instantly returns to the
cue point.
• Every time a new cue point is set, the button flashes
repeatedly.
27 Button
Switches between play and pause. During playback the
button lights blue, in pause mode it flashes.
28 Control PITCH +/–
This control sets the replay speed up to ±16 %. Turn the
control to the left to decrease the pitch, turn it to the right
to increase the pitch. The adjustment of the control is
effective only with the button PITCH pressed (button
lights red). The pitch percentage is indicated in the
display.
29 Power input
Plug in the supplied power cable here.
30 Line output, balanced
Stereo master output (balanced 3-pin XLR) for
connecting an amplifier, a mixer or other units with line
level inputs.
31 Line output, unbalanced
Stereo master output (unbalanced RCA) for connecting
an amplifier, a mixer or other units with line level inputs.