Omnitronic DJS-1150, Руководство по эксплуатации

Страница: 31 / 68

10602298_V_1_0.DOC 31/68
Possibility 2:
The player is in Playback-mode.
Press the Play/Pause-button and the player goes into Pause-mode.
Select the Cue-point via the Scratch-wheel. The display shows the selected starting-point (e.g. 3:42 22).
Press the In-button and the Cue-point is memorized. The Cue-indicator shortly flashes.
As soon as you press the Cue-button, the player returns the Cue-point and goes into Pause-mode.
Possibility 3:
The player is in Pause-mode or in Playback-mode.
Press the Track-button to select the desired track. The Cue-indicator shortly flashes and the Cue-point is set
to the track-start.
Memorizing several Cue-points:
With the DJS-1150, you can memorize up to 4 different Cue-points of different tracks and recall them via the
Bank-button or the Cue-button, respectively.
Press the Memory/Recall-button (LED on) and the desired Bank-button in order to memorize the current
Cue-point on the Bank-button.
By pressing the respective Bank-button, you can recall the Cue-points memorized via the Memory/Recall-
button. The last memorized Cue-point can be recalled by pressing the Cue-button.
The memorized Cue-points can be overritten at any time. Please note that the Cue-points can only be
deleted by switching the CD-player off an on again.
You can recall all memorized Cue-points from up to 127 CDs after switching the CD-player off. Therefore,
you have to switch the CD-player on, press the Memory/Recall-button (LED on) and insert the respective
CD. The display shows "Recall" until the loading process is finished.
6.8 Interactive scratch-wheel
With the Scratch-button, you can activate the Scratch-function. This button features 4 different functions.
Pitch Bend-function
Please refer to the explanations under 6.6 Adjusting the playback-speed.
Vinyl Cue-function:
The DJS-1150 features a Vinyl Cue-function for searching Cue-points like with a turntable.
Realtime programming of the Cue-points or Loop-points, respectively:
The player is in Playback-mode.
Press the Play/Pause-button and the player goes into Pause-mode.
Press the Scratch-button in order to disable the frame-function of the CD-player. The CD-player is now in the
Realtime Cue-mode. Select the Cue-point by turning the Scratch-wheel forwards and backwards. Repeated
turning forwards of the Scratch-wheel produces a playback resembling the playback-speed via the
Play/Pause-button. Press the In-button in order to memorize the Cue-point.
Cue Scratch-function:
Press and hold the Scratch-button until the LED is lit. The aluminium surface of the scratch-wheel is now
activated. When touching the scratch-wheel, the player returns to the cue-point.
6.9 Memorizing a sequence (Loop-function)
With the Loop-function, you can repeat a programmable sequence. Please note that you can only recall this
sequence within one track. If you also wish to insert in other tracks, you need to memorize the sequence as
sample on one of the Bank-buttons.
Memorizing the Loop-points:
Possibility 1:
The player is in Playback-mode.
If the In-button is pressed in the playback-mode, the CD keeps running and the A-point (starting-point) is
marked. By pressing the Out-button, the B-point (end-point) of the sequence is marked.
The player repeats the sequence between A-point and B-point until you press the Out-button once more.