00015954.DOC
43/47
Before attaching the speaker-system, make sure that the
installation area can hold a minimum point load of 10 times the
installation's weight (e.g. 13 kg weight - 130 kg point load).
The durability of the installation depends very much on the
material used at the installation area (building material) such as
wood, concrete, gas concrete, brick etc. This is why the fixing
material must be chosen to suit the wall material. Always ask a
specialist for the correct plug/screw combination indicating the
maximum load and the building material.
The wall-mounting must always be installed via all fixation holes.
Do only use appropriate screws and make sure that the screws
are properly connected with the ground.
Procedure:
Step 1:
On the wall-mounting, there are the holes for the installation.
Step 2:
Hold the wall-mounting onto the location where it is to be installed.
Step 3:
Mark the boreholes with a pen or a suitable tool.
Step 4:
Drill the holes.
Step 5:
Hold the wall-mounting in the desired position and tighten the screws.
Step 6:
Insert the eye-bolts into the threaded holes. The eye-bolts must be tightened until stop position,
hand-tight and without any tools.
Step 7:
Install the speaker-system on the wall-mounting.
Step 8:
Insert the quick links of the safety-ropes in the eye-bolts of the speaker-system. Pull the safety-
ropes through the wall-mounting’s safety eyelet. Insert the end in the quick link and tighten the
safety screw.
The wall mounting's maximum service life must never be exceeded.
Suspended installation
DANGER!
The subwoofer must never be suspended - Danger to Life due to crashing speaker-systems!
DANGER!
The top speaker must only be suspended by experienced and trained persons - Danger to
Life due to crashing speaker-systems!
Trained persons are e.g. Head Rigger, Lightcrew head etc.
If you lack these qualifications, do not attempt the installation yourself, but instead use a professional
structural rigger.
If you have doubts concerning the safety of a possible installation, do NOT install the speaker-system!
The speaker-system has to be installed out of the reach of people.
The installation material must always hold at least 12 times the weight of the speaker-systems.
