Omnitronic ACS-510, Руководство пользователя

Страница: 19 / 24

19
1
TONE control
For tuning the tone of input CH 1 to CH 3.
2
ON/LIMIT indicator
Lights up blue as power indicator and red when the signal level is too high; the limiter will reduce
the signal level to protect the speakers.
3
MIC/LINE selector switches
For adjusting the input level of inputs CH 1 and CH 2.
• MIC = for microphones
• LINE = for audio units with line output (e.g. CD player or mixer)
4
AUX stereo input
3.5 mm jack for connecting audio units with line output (e.g. MP3 player or smartphone) to
channel 3. When this jack is connected, the CH 3 RCA jacks will be switched off.
5
SUB volume control for the subwoofer
6
BALANCE control
For adjusting the volume ratio between the left and right satellite speaker.
7
GAIN control
For adjusting the volume of inputs CH 1 to CH 3.
8
MODE selector switch
Selects the signal for the 6.3 mm jack outputs OUT.
• CH2 THRU: the input signal of the CH 2 jacks is available
• REC OUT: the master signal is available
9
SETUP selector switch
Selects the operating mode for the satellite speakers.
•
: stereo mode
• : mono mode
10
CH 1 mono input
Balanced combo input (XLR/6.3 mm jack) for channel 1.
11
CH 2 stereo inputs
Balanced combo inputs (XLR/6.3 mm jack) for channel 2.
12
CH 3 stereo input
Unbalanced RCA jacks for channel 3. When the AUX jack is connected, the RCA jacks will be
switched off.
13
OUT stereo outputs
Balanced 6.3 mm jacks with the input signal of the CH 2 jacks or the master signal.
14
LINK IN/OUT stereo jack
Unbalanced 6.3 mm jack to be used as input and output for connection of another audio unit, e.g.
a second ACS-510 active system.
15
Left speaker connector
6.3 mm jack for connecting a satellite speaker.
• stereo mode: left speaker
• mono mode: stacked speakers
16
Power switch
17
Voltage selector switch
18
Fuse
19
Power input
20
Right speaker connector
6.3 mm jack for connecting the right satellite speaker in mono mode.