OM9300F Technical Manual
Rev.
1.0
Document No.: 19B00270
Date: Jan 09, 2018
Page: 5
1.6 Printable Area
1) Paper roll
The printable area of a paper with width of 79.5± 0.5mm(3.13"±0.02") is 72.2 ±
0.2mm(2.84"±0.008")(576dots) and the space on the right and left sides are
approximately 3.7 ± 2mm(0.15"±0.079").
a=79.5±0.5mm(3.13"±0.02")
a
b=0.125mm±0.05mm(.056"±.002")
c=69mm±0.2mm(2.84±.008")
b
d=3.7±0.2mm(0.15"±0.079")
□□□……………□□
e=3.7±0.2mm(0.15"±0.079")
c
[All the numeric values are typical.]
d e
< Figure 1.1 Paper Roll Printable Area >
1.7 Printing and Cutting Positions
Manual-cutter position
Auto-cutter blade position
Center of the print dot line
< Figure 1.2 Printing and Cutting Positions >
NOTE:
Numeric values used here are typical values; the values may vary slightly as a
result of paper slack or variations in the paper. Take the notice into account when
setting the cutting position of the auto-cutter.
1.8 Internal Buffer
1) Receive buffer: 8kbyte
1.9 Electrical Characteristics
1) Supply voltage:
+24 VDC ± 7%
2) Current consumption (at 24V):
Operating: Approx. 1.5A (at ASCII Printing)
Peak:
Approx. 10A (at print duty 100%, For 10
seconds or less)
Stand-by: Approx. 0.15A
