OM9300F Technical Manual
Rev.
1.0
Document No.: 19B00270
Date: Jan 09, 2018
Page: 19
Control command summary
No.
Command
Function
1
HT
Horizontal tab
2
LF
Print and line feed
3
CR
Print and carriage return
4
FF
Print end position label to start printing
5
CAN
Cancel print data in page mode
6
DLE EOT
Real-time status transmission
7
DLE ENQ
Real-time request to printer
8
DLE DC4
Generate pulse at real-time
9
ESC FF
Print data in page mode
10 ESC SP
Set character right-side spacing
11 ESC !
Set print mode
12 ESC $
Select/cancel user-defined character set
13 ESC %
Define user-defined characters
14 ESC &
Turn underline mode on/off
15 ESC *
Set bit image mode
16 ESC -
Turn underline mode on/off
17 ESC 2
Set 1/6 inch line spacing
18 ESC 3
Set line spacing using minimum units
19 ESC =
Select peripheral device
20 ESC ?
Cancel user-defined characters
21 ESC @
Initialize printer
22 ESC D
Set horizontal tab positions
23 ESC E
Select emphasized mode
24 ESC G
Select double-strike mode
25 ESC J
Print end feed paper using minimum units
26 ESC L
Select page mode
27 ESC M
Select character font
28 ESC R
Select international character set
29 ESC S
Select standard mode
30 ESC T
Select print direction in page mode
31 ESC V
Set/cancel 90
°
cw rotated character
32 ESC W
Set printing area in page mode
33 ESC \
Set relative position
34 ESC a
Align position
35 ESC c 3
Select paper sensor(s) to output paper-end signals
36 ESC c 4
Select paper sensor(s) to stop printing
37 ESC c 5
Enable/disable panel buttons
38 ESC d
Print and feed paper
n
lines
39 ESC p
General pulse
40 ESC t
Select character code table
41 ESC {
Set/cancel upside-down character printing
