OM9300F Technical Manual
Rev.
1.0
Document No.: 19B00270
Date: Jan 09, 2018
Page: 17
6. Dip Switch
6.1 Setting the Dip Switch
An 8 position DIP switch is located on the bottom of the printer unit. Gently turn the printer over
and use a small Philips screw driver to remove the cover. By changing the switch positions you
can modify the default setting for various functions such as cutter mode, character set, beeper,
printer speed etc.
NOTES:
1. To change the printer setting please make sure the power is turned off.
2. When changing the baud rate, make sure the host and printer baud rates match.
