7
TABLE OF CONTENTS
I. Site Preparation Guidelines
II. Quick Tour of Printer
Overview
A. FreeJet 320TX Textile Printer
B. Wet Cap & Printer Maintenance System
C. Print Head Assembly
D. Print Head Carriage
E. Ink Chip Reset Assembly
F. Infrared Laser Height Sensor
G. Shirtboards (pallets for garments)
III. Unpacking
Instructions
IV. Setting up the FreeJet 320TX
Overview
A. FreeJet power supply set up
B. Filling Bulk Ink Bottles
C. Filling the Cleaning Fluid Container
D. Charging the FreeJet with Ink
V. Software
Installation
Overview
A. Installing the Microsoft USB drive
B. Install the Omniprint Direct Rip software & USB “HASP” dongle
C. Installing the Epson R2400 Stylus Photo printer driver
VI. Initializing the FreeJet 320TX
VII. Nozzle Check Procedure
Overview
A. Turning on the FreeJet 320TX Main Power Switch
B. Starting the Epson Print Engine
C. Perform Head Cleaning Procedure
D. Register Adult Shirtboard (pallet)
E. Shirtboard Height Adjustment Procedure
F. Perform Nozzle Check
VIII. Installing the Omniprint FreeJet320 TX DirectRip Printer Environments
IX. Pre-Treating Dark Garments
X. Daily Operating Procedures
A. Start Up
B. Printing on White Garments
C. Printing on Colored and Dark Garments
D. Shut Down
XI. Preparing
Artwork
XII. Packing the FreeJet 32TX for Transport
XIII. Training Check List/Sign Off
