OmniPreSense OPS242, Руководство пользователя

Страница: 10 / 13

OPS-UM-001-C User Manual OmniPreSense Corporation 10
Command Name R/W Value
Z0 Sleep 0 Second Write Use to set back to normal operation.
ZI Sleep 1 Second Write
ZV Sleep 5 seconds Write
ZX or Z1 Sleep 10 seconds Write
ZL Sleep 50 seconds Write
ZC Sleep 100 seconds Write
Z2 Sleep 200 seconds Write
Z= n Set Sleep Time Write
Set the amount of time to sleep between data
processing. Ex., n = 5 would set the module to
sleep for 5 seconds (RF powered off) between
a transmit/receive pulse and processing.
Squelch Control – provides control over the sensitivity of the module to detect moving objects. Low
numbers are most sensitive, high numbers are least sensitive.
Command Name R/W Value
QI Squelch Control - 100 Write Highest sensitivity setting.
QV Squelch Control - 500 Write
QX Squelch Control – 1,000 Write
QL Squelch Control – 5,000 Write
QC Squelch Control – 10,000 Write
Qn Squelch Control Write
Set n to the desired squelch number x 1000.
For example, setting to Q2 will set the value to
2000. Valid values of
n are 0-9. 0 provides no
squelch control and all data will be reported.
Q=n Squelch Control Write
n = any arbitrary number between 1 and 4
billion.
QQ Quash On Write
Quash filters out the lowest frequency
components around DC.
Qq Quash Off Write Turns quash off.
Debug Modes – provides debug information about the module.
Command Name R/W Value
DR/Dr Red LED Write DR to turn on red LED, Dr to turn off.
DY/Dy Yellow LED Write DY to turn on yellow LED, Dy to turn off.